Anti-static Shielding Bag

1.Anti-static Shielding Bag 2.Accord with IPC/JEDEC J-STD-033 3.Anti-statics 4.Anti-moisture 5.OEM allowed  Anti-static Shielding Bag  

  

Static shielding/moisture Barrier bags:

This bag is engineered to protect contents from electro-static shock and moisture. Its 6 mil construction prevent punctures, safeguards static-and moisture sensitive devices during transport and storage, and helps ensure that vacuum is maintained for up to 2 years

This bags is available in several standard sixes designed to contain matrix trays, tubes and shipping reels and custom sizes can be made to fit the need of nearly any project.

When used with desiccant and Humidity indicator card, the bags provided superior for static-and moisture-sensitive devices.

l         6.1 mil thick static dissipative nylon, aluminum foil, and static dissipative polyethylene provide a very low MVTR.

l         Meets requirement of EIA541, IPC/JEDES J-STD-033 and MIL-PRF-18705D Type 1. Class1

Construction

Static shielding/moisture Barrier bags are constructed in three layers. This cross section depicts the layer order from top to bottom. These layers consist of a static dissipative nylon outer layer and a static dissipative polyethylene inner layer and with a center layer of medical foil

Configurations

Static shielding/moisture barrier bags are available in custom sixes or in several industry standard sizes designed for reels, matrix trays and tubes. Bags are offered in a 2-seal configuration with a bottom fold or a 3-seal configuration, each with our standard hot-stamp or your company’s hot stamped or printed logo

Shelf life and storage

We recommend that this bags be used within 3 years from the date of manufacturer. Store this products in its original packaging in a climate-controlled environment where temperature range from 20°C+/_16°C(68°F+/_29°F) and relative humidity is 50%+/_30%.

Physical properties
Property	Typical value	Test method / standard
thickness	6.1mil	N/A
Tensile strength	>4500p	ASTMD882
Puncture resistance	Pass	MIL-PRF-81706D
Seam strength	<0.0003grm	ASTMF1249
Heat sealing conditions
temperature	300-400°F	N/A
time	0.6-4.5 seconds	N/A
pressure	30-70PSI	N/A
Electrical properties
EMI Attenuation	45db	MIL-PRF-81705D
Surface Resistivity interior exterior	<1012ohms/square <1012ohms/ square	ASTMD 257 ASTMD 257
Static Decay	<0.05second	FTMS 101 MTH 4046
Static shielding	<15volts	EIA 541

Note: These values were developed from random samples taken from production material. We believe them to be typical for the product,However, actual may vary somewhat from those depicted above. You should determine product suitability based on your own internal criteria.

CAUTION

            1. Pay attention to the bumps part of the packed products, protruding may lead to bag burst.

            2. Don't use alcohol and chemical to clean bags , avoid destroy anti-static cover.            3.In order to avoid aluminum layer fracture, please don't bend.            4.  not touch sweat and oil .            5.  please  debugging the sealing equipment.In order to get a perfect sealing performance            6. Sampling, and observe 1-2 hours. Confirm again before packing in carton            7. keep away from Sharp objects when packing in a carton.use humidity indicator card and desiccant to confirm your products in     good packing enviroment

            .

                                                                                                               Anti-static Shielding Bag

Anti-static Shielding Bag